CIRCUTOR computer PLUS-TF Series - Manual (Page 58)

58
HI
High value that triggered the alarm. No value will be displayed when the alarm has not been triggered due to
the HI limit.
LO
Low value that triggered the alarm. No value will be displayed when the alarm has not been triggered due to
the LO limit.
Status
ON: Alarm enabled and tripped
OFF: Alarm enabled but untripped
DIS: Alarm disabled
Table 10-2.- Description of the legends on Fig. 100 and 101
Fig. 100.- Alarm status screen (DIS or OFF)
Fig.101.- Alarm status screen for an alarm tripped
by HI (ON)
Fig. 102.- Status screen with the day of the last trip Fig.103.- Status screen with the day of the last trip