CIRCUTOR computer PLUS-TF Series User Manual

Page 31

Fig. 21.- Main menu

Fig.22.- Setup menu



Select the option

and press

. The screen shown on Fig. 23 will be displayed.



Press

Edit

and the password screen will be displayed if the edition is locked. Follow the steps

described in section 7.1. After entering the password the screen shown on Fig.24 will be displayed.

Fig.23.- Programming capacitor power

Fig.24.- Programming capacitor power



On the screen shown on Fig.24, each box represents a capacitor step and the number inside it states

the nominal kvar of the capacitor. Use the arrow

to change the step being adjusted. To adjust the

first one, press

Edit when it is highlighted in reverse video and the screen shown on Fig. 25 will be

displayed, where you can change the kvar of the highlighted step.

This manual is related to the following products: