Asic options of the – CIRCUTOR computer PLUS-TF Series User Manual

Page 22

Fig. 11.- Default screen in the STOP mode

Fig. 12.- Default screen in the RUN mode

Fig. 13.- Main Menu Screen

All screens will display the menu browsing options on the lower part of the screen, which must be selected
by pressing the

keys, depending on the option selected. Therefore, to move from the

default screen (Fig. 11) to the main menu (Fig. 13), press

Computer plus will jump directly to the default screen (Fig. 11 or Fig. 12) when no key has been pressed
during a period of two minutes.

5.3

Basic options of the Main Menu

After powering the

Computer plus

and completing the start-up process, simply press the

key various

times to access the main menu (Fig.13).

6 folders will be displayed on the main menu, which correspond to the

basic functions

that can be

executed by

Computer Plus

. Said functions are:



Measure

: Displays the parameters measured (Voltages and currents) and other parameters

calculated (Power, power factor, etc.)



Setup

: Used to adjust the unit and adapt it to the application conditions.

This manual is related to the following products: