CIRCUTOR computer PLUS-TF Series - Manual (Page 43)

43
 Select the Compensation (Fig.58) option and press
OK The screen on Fig.59 will be displayed.
 Press Edit to adjust the desired parameter values.
Fig. 58.- Tact, Trec Menu
Fig. 59.- Edit Tact, Trec Menu
 The options available are:
In Comp … you can select three options TRIPH or PH-PH which means three-phase or Phase-
Phase compensation, respectively.
In Man … you can select the following options: FCP or LINIAL. These options are related to the
steps sequence in FIFO (FCP) or LIFO (LINIAL) mode. The FIFO mode means first in - first out
(disconnected) and the LINIAL mode means that the last one in is the first one disconnected.
In Contrl … you can select the following options: SEC or TOTAL. SEC means that there is a
sequential step input (one by one, respecting Tact). TOTAL means that all steps required to reach
the desired cos

will be connected at once.
In Mode … you can choose between RUN or STOP, to start or stop Computer plus.
 To edit a field, follow the procedure described in section 5.4.
7.3.10 Adjusting the Date and Time
 Open the setup menu by following the procedure described in section 7.3.2.
 Select the Date / Time (Fig.60) option and press OK . The screen on Fig.61 will be displayed.
 Press
Edit to adjust the desired day/month/year and hour:minute:second values.

To edit a field, follow the procedure described in section 5.4.