CIRCUTOR computer PLUS-TF Series - Manual (Page 63)

63
12.1 Opening the Test menu
 To open the test menu, go to the main menu (Fig.113). Use the arrows to select
the folder and press OK. A list with the three options available will be displayed (Fig.114).
Fig. 113.- Main menu Fig. 114.- Options of the Test menu

The options can be selected with the and dynamic keys; then press OK.
12.2 Test cos

and resonance test
These two options must be used at the same time. The purpose is to execute the manual connection and
disconnection of capacitors while displaying the cos

or THDV and THDI of each phase. This allows you to
check that the compensation unit is working correctly and whether the connection of a certain number of
capacitors is causing resonances in the installation or not. Each test is carried out as follows:

The Test cos φ option of Computer Plus shows the cos φ of all phases and the type (inductive or
capacitive), as well as the cos φ III (total) and its type (Fig.115).
Fig. 115.- cos φ Test Fig. 116.- Resonance Test