CIRCUTOR MDC-20 - Manual (Page 54)

MDC-20
Page 54 of 58 User Manual
• Input: Value of the variable configured in the load status field. Normally its value
changes between 1 and 0; otherwise it must change between a positive and negative
value.
• Output: Value of the variable configured in the load action field. Its value = 1 or positive
when the output that connects the load is activated.
Fig.8-51 . – Outputs
8.3.5 Discriminator Unit
Fig. 8-52 . – List of discriminator units
You can access the information on the
discriminators that have been created in
the power control application.
The user must select the discriminator
from the list of units.
The information displayed on the screen of these discriminators is very important as it allows
the user to know the time accumulated in each time interval, the time remaining until
deactivation and how much time is left until that time period is reactivated.
The active interval is also permanently identified with an icon that changes to green when the
period is active and grey when it is deactivated.
Fig.8-53 . – Status display