CIRCUTOR MDC-20 - Manual (Page 51)

MDC-20
User Manual Page 51 of 58
8.3.3 Load action
The load action option displays the loads configured in the system associated with several
buttons that allow you to force the connection or disconnection of the load or release the load
from any lock for its management by the system. If the load is not enabled, all the deactivated
fields appear so it is not possible to take any action on the load.
Fig.8-45 . – Screen for forcing loads
• Connect: This option connects the load permanently, with it no longer being available
for the power control system until its disconnection is released or forced manually.
• Disconnect: This option disconnects the load permanently, with it no longer being
available for the power control system until its connection is released or forced manually.
• Free: This cancels the forced connection or disconnection so that the load becomes
available again for the power control system.
When there is a change in status of the loads in this option, the load icon in the power control
option changes.
Fig.8-46 . – Forced load icons