CIRCUTOR MDC-20 - Manual (Page 5)

MDC-20
User Manual Page 5 of 58
SAFETY PRECAUTIONS
Follow the warnings described in this manual with the symbols shown below.
DANGER: Warns of a risk, which could result in personal injury or material
damage.
WARNING: Indicates that special attention should be paid to a specific point.
If you have to handle the unit for its installation, start-up or maintenance, bear in mind the
following:
Incorrect handling or installation of the unit may result in injury to personnel
as well as damage to the unit. In particular, handling with voltage applied may
result in electric shock, which may cause death or serious injury to the
personnel involved. Defective installation or maintenance may also lead to
the risk of fire.
Carefully read the manual prior to connecting the unit. Follow all installation
and maintenance instructions throughout the unit's working life. Pay special
attention to the installation standards of the National Electrical Code.
If in order to install the unit it is necessary to work in areas with high-voltage
(HV) units; bear in mind that the personnel that handle units in this area must
be trained and authorised to work in HV installations.
Refer to the user manual before using the unit
If the instructions preceded by the danger or warning symbol are not
respected, this can result in personal injury or damage to the unit and/or
installations.
DISCLAIMER
CIRCUTOR, SA reserves the right to make modifications to the unit or the unit specifications set
out in this user manual without prior notice.
The term of the CIRCUTOR guarantee is two years from the date of purchase and is limited to a
refund of the purchase price, free repair or replacement of the faulty unit that is returned to the
CIRCUTOR after-sales service within the term of the guarantee.
CIRCUTOR, SA provides its customers with the latest versions of unit specifications and the
most updated manuals on its web site.
www.circutor.com