CIRCUTOR MDC-20 - Manual (Page 25)

MDC-20
User Manual Page 25 of 58
Fig.7-4 . – Configuration options
7.5.1 Driver Parameters
This menu option (see Fig.7-4) enables the basic configuration of what must be the unit's driver
and display of values to be shown in the client (see Fig.7-5).
Fig.7-5 . – Driver parameters
7.5.2 Device parameters
This menu option (see Fig.7-4) will allow you to configure the internal parameters of the unit
(see Fig.7-6). On opening the dialogue box, the software will read the configuration of the unit.
Changes can be made if required; if you click ‘Accept’ after making changes the software will
send the information to the unit.