Dukane 8768 - Manual (Page 74)

74
ᕡ Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
The Picture menu will be displayed (factory preset).
NOTE: The commands such as ̇̈ , ENTER, CANCEL in the gray bar show available buttons for your operation.
2. Press the SELECT
̇̈
buttons on the remote control the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the
first tab.
4. Use the SELECT
̆̄
buttons on the remote control or the projector cabinet to select the item you want
to adjust or set.
You can use the SELECT ̇̈ buttons on the remote control or the projector cabinet to select the tab you
want.
NOTE: You can select a tab only when the tab color is orange.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
NOTE: You can also display a submenu window by pressing the SELECT ̈ button.
6. Adjust the level or turn the selected item on or off by using the SELECT
̆̄̇̈
buttons on the remote
control or the projector cabinet.
7. Press the ENTER button or the CANCEL button on the remote control or the projector cabinet.
Changes are stored until you adjust it again.
ENTER ................... Stores changes.
CANCEL ................. Returns to the previous screen without storing changes.
8. Repeat steps 2 -7 to adjust an additional item, or press the CANCEL button on the remote control or the
projector cabinet to quit the menu display.
Main menu
Submenu window
Currently available
buttons
Submenu
7. Using On-Screen Menu