Dukane 8768 - Manual (Page 109)

109
Replacing the Filters
NOTE: Do not wash the filter with soap and water. Soap and water will damage the filter membrane. Before replacing the filter,
remove dust and dirt from the projector cabinet. Keep out dust and dirt during filter replacement.
NOTE: When you replace the lamp, it is also wise to replace the filters. The filters come in the same package with your replace-
ment lamp.
CAUTION
•Turn off the projector, turn off the main power switch and unplug the projector before replacing the filters.
• Do not attempt to operate the projector without the two filter covers.
To replace the filters (sponge)
1. Remove the filter by pushing on the catch and pull it.
8. Maintenance
2. Gently peel off the filter (sponge) and replace it with the new one.
3. Reinstall the new filter cover.
The two filter covers are interchangeable.
To reset the filter usage time, from the menu, select [Setup]
→ [Page 5] → [Filter Usage] → [Clear Filter Usage Meter].
See also page 98 for resetting the filter usage time.
Catch