Dukane 8768 - Manual (Page 100)

100
ᕧ Menu Descriptions & Functions [Information]
Displays the status of the current signal, the lamp and the projector usage hours. This dialog box has four pages.
The information included are as follows:
[Page 1] Source Name
Input Terminal
Entry No.
Horizontal Frequency
Vertical Frequency
[Page 2] Signal Type
Video Type
Sync Type
Interlace
Sync Polarity
[Page 3] Remaining Lamp Time (%)
Lamp Hour Meter (H)
Filter Usage (H)
Projector Usage (H)
NOTE: The progress indicator shows the percentage of remaining bulb life. The value informs you of the amount of
lamp and projector usage respectively.
[Page 4] Version (BIOS, Firmware, Data)
Remaining Lamp Time Display
When the remaining lamp time reaches 0, the Remaining Lamp Time bar indicator changes from 0% to 100 Hours and
starts counting down. If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether
the lamp mode is set to Normal or Eco.
7. Using On-Screen Menu