Applied Motion SV7-C-CE - Manual (Page 52)

52
SV7 Hardware Manual 920-0012F
12/18/2014
Accessories
Breakout Box for DB-25 Connector
BOB-1, includes cable
Screw Terminal Connectors that mate directly to the DB-25 connector on the front panel of the
drive:
Phoenix Contact P/N 2761622
This connector is not available from Applied Motion. You must purchase it from a
Phoenix distributor.
See App. Note 16 for more detail: http://www.applied-motion.com/sites/default/files/APPN0016_
Simple-25-pin-mating-connections.pdf
Mating Cable for IN/OUT connector with “flying leads”
Black Box P/N: BC00702
This cable is not available from Applied Motion. You must purchase it from Black Box .
Useful for custom wired applications. This shielded cable has a DB-25 connector on each
end. You can cut off the female end to create a 6 foot “DB-25 to flying lead cable”.
It’ll be easier to wire if you get the cable color chart from Black Box’s web site .
See App. Note 16 for more detail: http://www.applied-motion.com/sites/default/files/APPN0016_
Simple-25-pin-mating-connections.pdf
Regeneration Clamp:
Applied Motion Products RC050 .
Operator Terminal (-Si drives only)
Applied Motion Products MMI-01 or MMI-02 (backlit).