Applied Motion SV7-C-CE - Manual (Page 51)

51
SV7 Hardware Manual 920-0012F
12/18/2014
Digital MOSFET. 16 kHz PWM.
Supply voltage: 18 - 88 VDC, motor current: 0.5 to 7 amps rms continuous,
0.5 to 14 amps rms peak (2 seconds max, i 2 t limiting)
Step & Direction: differential, optically isolated, 5V logic. 330 ohms internal
resistance.
0.5 µsec minimum pulse width. 2 µsec minimum set up time for direction
signal.
All other digital inputs: optically isolated, 12 - 24V logic. 2200 ohms. Maxi-
mum current: 10 mA.
±10VDC, 12 bit ADC, 100k ohms internal impedance.
Photodarlington, 80 mA, 30 VDC max. Voltage drop: 1.2V max at 80 mA.
1.775 x 3 x 5 inches overall. 10 oz (280 g)
Ambient temperature range: 0°C to 40°C.
Differential line receiver, 5V logic.
Minimum resolution 400 lines (1600 counts/rev).
Maximum resolution: 32768 lines (131,072 counts/rev)
Technical Specifications
Amplifier
Digital Inputs
Analog Inputs
Outputs
Physical
Encoder Inputs
Mating Connectors and Accessories
Mating Connectors
Motor/power supply: PCD P/N ELV06100, included with drive.
IN/OUT1: DB-25 male. AMP P/N 747912-2. Shell Kit AMP P/N748678-3. Included.
Optional encoder feedback: HD-15 male. Norcomp P/N 180-015-102-001. Shell Kit AMP P/N
748678-1. Not included.