Altera Transceiver Signal Integrity Development Kit, Stratix V GX Edition - Manual (Page 9)

July 2012 Altera Corporation Transceiver Signal Integrity Development Kit
Stratix V GX Edition Reference Manual
2. Board Components
Introduction
This chapter introduces all the important components on the Stratix V GX transceiver
signal integrity development board.
Figure 2–1 illustrates major component locations
and Table 2–1 provides a brief description of all features of the board.
1
A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Stratix V GX development kit documents directory.
f
For information about powering up the board and installing the demo software, refer
to the
Transceiver Signal Integrity Development Kit, Stratix V GX Edition User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Stratix V GX” on page 2–6
■ “MAX II CPLD System Controller” on page 2–9
■ “Configuration, Status, and Setup Elements” on page 2–14
■ “Clock Circuitry” on page 2–21
■ “General User Input/Output” on page 2–29
■ “Components and Interfaces” on page 2–33
■ “Flash Memory” on page 2–37
■ “Power Supply” on page 2–39
■ “Statement of China-RoHS Compliance” on page 2–43