Statement of china-rohs compliance, Statement of china-rohs compliance –67 – Altera Stratix IV GX FPGA Development Board User Manual
Page 75

Chapter 2: Board Components
2–67
Statement of China-RoHS Compliance
November 2010
Altera Corporation
Stratix IV GX FPGA Development Board, 530 Edition Reference Manual
The remote sense is routed to the FPGA's diode pins to measure the voltage drop. For
very accurate temperature readings, the I/O adjacent to the FPGA diode sense pins
must be halted.
lists the temperature sense interface pin assignments, signal names, and
functions.
lists the temperature sense component reference and manufacturing
information.
Statement of China-RoHS Compliance
Table 2–62
lists hazardous substances included with the kit.
Table 2–60. Temperature Sense Pin Assignments, Schematic Signal Names, and Functions
Board
Reference
Description
Schematic Signal
Name
I/O Standard
MAX II CPLD EPM2210
System Controller
Pin Number
Stratix IV GX
Device
Pin Number
U27.14
SMB clock
SENSE_SMB_CLK
2.5-V
R1
W34
U27.12
SMB data
SENSE_SMB_DATA
R4
AH32
U27.9
Programmable
over-temperature
OVERTEMPn
P5
—
U27.11
Programmable alert
TSENSE_ALERTn
M2
—
Table 2–61. Temperature Sense Component Reference and Manufacturing Information
Board Reference
Description
Manufacturer
Manufacturing
Part Number
Manufacturer
Website
U26
Temperature sense, remote and
local, programmable alert.
Maxim
MAX1619MEE+T
Table 2–62. Table of Hazardous Substances’ Name and Concentration
Notes
(1)
,
(2)
Part Name
Lead
(Pb)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr6+)
Mercury
(Hg)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl Ethers
(PBDE)
Stratix IV GX development board
X*
0
0
0
0
0
12 V power supply
0
0
0
0
0
0
Type A-B USB cable
0
0
0
0
0
0
User guide
0
0
0
0
0
0
Notes to
Table 2–62
:
(1) 0 indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the
SJ/T11363-2006 standard.
(2) X* indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant
threshold of the SJ/T11363-2006 standard, but it is exempted by EU RoHS.