Altera Arria II GX FPGA Development Board - Manual (Page 9)

February 2011 Altera Corporation Arria II GX FPGA Development Board Reference Manual
2. Board Components
Introduction
This chapter introduces the major components on the Arria II GX FPGA development
board.
Figure 2–1 illustrates major component locations and Table 2–1 provides a brief
description of all component features of the board.
1 A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Arria II GX FPGA development kit documents
directory.
f For information about powering up the board and installing the demonstration
software, refer to the
Arria II GX FPGA Development Kit User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Arria II GX Device” on page 2–5
■ “MAX II CPLD EPM2210 System Controller” on page 2–7
■ “Configuration, Status, and Setup Elements” on page 2–12
■ “Clock Circuitry” on page 2–21
■ “General User Input/Output” on page 2–24
■ “Components and Interfaces” on page 2–28
■ “Memory” on page 2–39
■ “Power Supply” on page 2–49
■ “Statement of China-RoHS Compliance” on page 2–52