Altera Audio Video Development Kit, Stratix IV GX Edition - Manual (Page 20)

4–4 Chapter 4: Development Board Setup
Factory Default Switch Settings
Audio Video Development Kit, Stratix IV GX Edition User Guide © November 2009 Altera Corporation
4. Set DIP switch bank (SW5) to match Table 4–3 and Figure 4–2 .
5. Set DIP switch bank (SW6) to match Table 4–4 and Figure 4–2 .
f
For more information about the FPGA board settings, refer to the Stratix IV GX FPGA
Development Board Reference Manual .
6. Set the SDI HSMC jumpers to match Table 4–5 .
f
For more information about the SDI HSMC jumper settings, refer to the SDI HSMC
Reference Manual .
7 On
8 On
Table 4–3. SW5SW5 Dip Switch Settings
Switch Position
1 Off
2 Off
3 Off
4 Off
Table 4–4. SW6 Dip Switch Settings
Switch Position
1 Off
2 On
3 On
4 On
Table 4–2. SW4SW4 Dip Switch Settings (Part 2 of 2)
Switch Position
Table 4–5. SDI HSMC Jumper Settings
Board
Reference Name Position
J4 CD_MUTE_2 On
J5 EQ_BYPASS_2 Off
J6 CD_MUTE_1 On
J7 EQ_BYPASS_1 Off