Pilz ST SB DP S, SW paket PROFIBUS-DP - Manual (Page 6)

Introduction
1-2 PROFIBUS-DP-Slave Operating Manual
4 Setting parameters
This chapter describes the parameters, diagnostics and the
configuration of input and output data.
5 Commissioning
This chapter describes the commissioning procedure.
6 Standard function blocks
This chapter provides information on the parameters and
management of standard function block SB 230.
7 Appendix
The example is designed to provide support when linking standard
function block SB 230 into a user program.
Terminology
• The term "safety system", "system" or "PSS" will be used in this manual
to refer to the programmable control systems PSS. If the description is
only valid for a particular device, the specific product name will be used
(e.g. PSS SB 3006 DP-S, PSS(1) DP-S).
• In this manual, data transfer is always regarded as viewed from the PSS:
input data / receive data is sent from a PROFIBUS subscriber to the
PSS. Output data / send data is sent from the PSS to a PROFIBUS
subscriber.