Pilz ST SB DP S, SW paket PROFIBUS-DP - Manual (Page 5)

1-1 PROFIBUS-DP-Slave Operating Manual
This manual describes the communications software for the:
• PSS(1) DP-S module
and
• PSS SB 3006 DP-S compact programmable safety system.
Separate manuals are available for using the respective programmable
control systems PSS:
• PROFIBUS-DP-Slave Hardware Manual
• PSS SB 3006 DP-S Shortform
• PSS SB 3006 DP-S Installation Manual
To fully understand this manual you will need to be conversant with the
information found in the general documentation for the programmable
control systems PSS (System Manual, Installation Manual for the modular
PSS and the Programming Manual).
Familiarity with general documentation on PROFIBUS (EN 50170 Volume
2 in the current version) is also required in order to understand bus-
specific processes, configurations and terminology. Familiarity with a
network configuration tool is also required.
This manual is intended for instruction and should be retained for future
reference.
Overview of manual
1 Introduction
The introduction is designed to familiarise you with the contents,
structure and specific order of this manual.
2 Overview
This chapter provides information on the most important features of
the software package and briefly outlines the application area.
3 Intended use
You must read this chapter, as it contains important information on
safety regulations and intended use.
Introduction