4 qualified personnel, 5 working on the machine, 6 disposal – Pilz PMCtendo SZ.41/0/1/2/7/K/H/60/00 User Manual
Page 8: 7 directives and norms
Operating Manual PMCtendo SZ
1002405-EN-03
8
2 Notes on Safety
2.4
Qualified personnel
Devices may cause residual risks. For this reason, all work on the devices as well as op-
eration and disposal must only be performed by qualified personnel who are aware of the
possible dangers.
Qualified personnel are persons who have acquired the authorisation to perform these
activities by
•
Training from specialists and/or
•
Instruction from specialists
In addition, they must have
•
read,
•
understood and
•
observed the applicable regulations, legal provisions, rules and standards and exist-
ing technical documentation including the safety information contained in it.
2.5
Working on the machine
Apply the 5 safety rules in the order stated before working on the machine:
1. Activate. Make sure the auxiliary circuits are activated.
2. Secure against unintentional restart.
3. Make sure no voltage is present.
4. Ground and short-circuit.
5. Cover or enclose adjacent live parts.
2.6
Disposal
Please comply with the latest national and regional regulations! Dispose of the individual
parts separately depending on their nature and currently valid regulations such as, for
example:
•
Electronic scrap (PCBs)
•
Plastic
•
Sheet metal
•
Copper
•
Aluminum
2.7
Directives and norms
The servo motors meet the following guidelines and norms
•
Directive 2006/95/EC (Low Voltage Directive)
•
Directive 2004/108/EC (Directive on Electromagnetic Compatibility)
•
DIN EN 60204-1 version 2007
•
DIN EN 60034-1 version 2011
- PMCtendo SZ.51/0/1/2/7/K/H/30/00 PMCtendo SZ.41/0/1/2/7/K/H/30/00 PMCtendo SZ.55/1/1/2/7/F/H/30/00 PMCtendo SZ.75/0/1/2/7/K/H/30/00 PMCtendo SZ.71/0/1/2/7/K/H/30/00 PMCtendo SZ.75/0/1/2/7/W/H/30/00 PMCtendo SZ.42/1/1/2/7/K/H/30/00 PMCtendo SZ.52/1/1/2/7/K/H/30/00 PMCtendo SZ.72/0/1/2/7/K/H/60/00 PMCtendo SZ.55/0/2/2/7/K/H/45/00 PMCtendo SZ.44/0/1/2/7/K/H/30/00 PMCtendo SZ.73/0/1/2/7/K/H/45/00 PMCtendo SZ.52/0/1/2/7/K/H/30/00 PMCtendo SZ.73/0/1/2/7/F/H/30/00 PMCtendo SZ.51/0/2/2/7/K/H/30/00 PMCtendo SZ.53/0/1/2/7/K/H/30/00 PMCtendo SZ.53/0/1/2/7/K/H/60/00 PMCtendo SZ.51/1/1/2/7/K/H/60/00 PMCtendo SZ.75/0/2/2/7/F/H/30/00 PMCtendo SZ.73/0/1/2/7/K/H/30/00 PMCtendo SZ.41/1/2/2/7/K/H/60/00 PMCtendo SZ.41/0/2/2/7/K/H/60/00 PMCtendo SZ.75/2/1/2/7/F/H/45/00 PMCtendo SZ.55/0/2/2/7/F/H/30/00 PMCtendo SZ.51/1/2/2/7/K/H/60/00 PMCtendo SZ.51/0/2/2/7/K/H/60/00