Pilz PMCtendo SZ.41/0/1/2/7/K/H/60/00 - Manual (Page 49)

Operating Manual PMCtendo SZ 
1002405-EN-03
49
9 Technical data
9.9 Type-specific data
IMPORTANT
Overheating!
Repainting the motor changes the thermal properties. The motor can not be operated
with the nominal data.
 Retain the paint of the motor (matt black in accordance with RAL 9005).
The technical data apply to energy-optimized servo amplifier settings and were deter-
mined under the following thermal mounting conditions:
•
Mounting of motor with steel bracket on baseplate.
• Minimum mounting surface area between motor and steel bracket, and between
steel bracket and baseplate according to the following table:
Ensure that comparable thermal mounting conditions exist in your system!
PMCtendo SZ motors – number of motor poles
Motor Mounting area
between motor flange and
steel bracket between steel bracket and
baseplate
S  B  H [mm] [m 2 ]
SZ.3x 20  210  285 0,03
SZ.4x 20  210  285 0,03
SZ.5x 25  210  285 0,03
SZ.7x 25  285  285 0,03
SZ.8x 25  285  285 0,03
Motor Number of poles – PZ [1]
SZ.3x 10
SZ.4x 14
SZ.5x 14
SZ.7x 14
SZ.8x 16