Pilz PMCtendo SZ.41/0/1/2/7/K/H/60/00 - Manual (Page 39)

Operating Manual PMCtendo SZ 
1002405-EN-03
39
9 Technical data
9 Technical data
9.1 Ambient conditions
9.2 Device Features
Ambient conditions Standard Optional
Protection class IP56 IP66
Transport/ 
storage ambient conditions
-30°C to +85°C —
Ambient temperature during operation -15°C to +40°C —
Thermal class F
(Limit temperature 155°C, warm-
ing ∆T = 100 K in accordance
with DIN EN 60034/VDE 0530) —
Cooling IC 410 Convection cooling • IC 416 Convection cooling by
external fan (IP 44)
• Water cooling in A-side
flange
Installation height ≤ 1000 m above sea level —
Vibration level A according to DIN 60034-14:
2008-03 B according to DIN 60034-14:
2008-03
Maximum vibrating load for quasi-sinu-
soidal movements up to 1 kHz 5 g
Note that built-in brakes can no
longer fully establish their hold-
ing torque due to vibration loads —
Device features Standard
Model IM B5, IM V1, IM V3
Surface Matt black in accordance with RAL 9005
Bearings Ball bearings with permanent lubrication and non-contact seal
Service life > 20 000 h
Seal Radial shaft seal rings A-side
Shaft end Smooth shaft, diameter quality k6
True running accuracy tolerance N in accordance with DIN 42955
Coaxiality tolerance N in accordance with DIN 42955
Axial run-out N in accordance with DIN 42955
Noise level Limit values in accordance with EN 60034-9