Pilz PMCtendo SZ.41/0/1/2/7/K/H/60/00 - Manual (Page 17)

Operating Manual PMCtendo SZ 
1002405-EN-03
17
4 Transportation and storage
4 Transportation and storage
4.1 Transportation
Secure the shafts and bearings of the servo motor against impact when transporting. Use
eye bolts (if provided) and suitable slings when transporting the servo motor. Only lift the
servo motor at the eye bolts without additional attachments. Never transport the servo
motor on the fan guards or the angular flange sockets.
4.2 Storage
Store the servo motors in enclosed, dry spaces. Storage on the fan guards is not permit-
ted.
If the servo motors are protected from all harmful environmental influences, brief storage
in open-air spaces with roofing is permitted.
Make sure that no condensation forms during storage, e.g. because of extreme tempera-
ture fluctuations with a high level of humidity.
Protect the motor shaft from corrosion when storing over an extended period. Note that
the insulation resistance of the winding must be checked after storing over an extended
period.