Pilz PMCtendo SZ.41/0/1/2/7/K/H/60/00 - Manual (Page 19)

Operating Manual PMCtendo SZ 
1002405-EN-03
19
5 Installation
The following installation positions are admissible:
Particularly in installation position IM V3, ensure that no liquids from attachments can run
into the motor bearings.
5.2 Install motor
IMPORTANT
Material damage!
Impact and other forces can cause damage to the bearings, feedback system and motor
shaft.
 Do not hit the motor shaft or motor housing with a hammer or other tools.
 Do not apply any pressure, impact or high acceleration to the motor.
 Use backlash-free, frictionally engaged chucks or clutches.
 Always use the tightening thread provided in the motor shaft to fit or remove clutches,
gears or belt pulleys. Use suitable tools!
Motor External fan Minimum distance x
Fmin
[mm]
SZ.4x FL4 20
SZ.5x FL5 20
SZ.7x FL7 30
SZ.8x FL8 30
Admissible installation positions
IM B5 IM V1 IM V3