Pilz PSSu XR F -T - Manual (Page 16)

5.2 Install remote station
5 Installation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-2
5.2 Install remote station 5200 Install remote station 5- ][Montage Remote
The remote station is installed in exactly the same way as a
PSSuniversal head module.
][Montage Kopfmodul
Prerequisite:
 The mounting rail must be installed.
Procedure:
 Install an end bracket to the left of the head module or leave enough
space for one.
 Slot the groove on the head module on to the mounting rail from be-
low [1].
 Push the head module back [2] until you hear it lock into position.
Schematic representation:
[2]
[1]