Pilz PSSu XR F -T - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 1000 Safety Safety 3- 3.1 Intended use 1100 Intended use 3- ][Gerätebeschreibung FS-Module Sys A + B
The module may be used for standard and failsafe applications in sys-
tem environment A and B.
][Gertebeschreibung XR
The module may be used as a remote station to extend the PSSuniversal
module bus inside a control cabinet via a cable connection. It can be
operated with a base station of type PSSu XB F-T plus the connection
cable PSSu A RJ45-CAB 1.5M.
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
Please refer to the guidelines stated in the "PSSuniversal Installation
Manual". The module is designed for use in an industrial environment. It
is not suitable for use in a domestic environment, as this can lead to in-
terference.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the module
 Use of the module outside the areas described in this manual
 Use of the module outside the technical details (see chapter entitled
"Technical Details")
Bestimm_Verwend_Info_PSSu_ab_1.7.0_PAS4000_ab_1.2.1
INFORMATION
The module is supported by
 PSSuniversal Configurator and PSSuniversal Assistant from
Version 1.7.0
 PAS4000 from Version 1.2.1
– We recommend that you always use the latest version
(download from www.pilz.de).