Pilz PSSu E S 2DOR 10 - Manual (Page 19)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-3
4.2 Configuration
4 Function description
4.2 Configuration 4200 Configuration 4- 4.2.1 PSSu assignment in system environment A
PSSu assignment in system environment A 4- ][Funktionsbeschreibung_BA Konfig ST-Aus
It is not necessary to configure ST outputs in the PSSuniversal Configu-
rator on the PSS WIN-PRO system software, but ST modules can be se-
lected and displayed.
The ST process image can be optimised by combining adjacent bits of
the same type into bytes.
Further information on configuration is available in the PSSuniversal
Configurator's online help.
4.2.1.1 Addresses in the process image
Addresses in the process image 4- ][Funktionsbeschreibung_BA PA 2 x ST-Aus
The module occupies 2 consecutive bit addresses in the process image.
4.2.2 PSSu assignment in system environment B
PSSu assignment in system environment B 4- ][Funktionsbeschreibung_Zusatz I/O-Daten Sys B
Data access is via pre-defined I/O data types:
][Funktionsbeschreibung PSSu E S 2DOR 10
Configuration SafetyBUS p Standard bus system
FS-PIO ST-PII ST-PIO
None - - - - - - 2 Bit
I/O data name I/O data type I/O data element Meaning
O0(11,21) ST_O_DO Data: BOOL Output data O0
O1(14,24) ST_O_DO Data: BOOL Output data O1