Pilz PSSu E F 4DO 0.5 - Manual (Page 37)

Technical details
Operating Manual PSSu E F 4DO 0.5(­T)(­R)
21316­EN­05 37
Environmental data 312210 314210 315210
Protection type
In accordance with the
standard
EN 60529 EN 60529 EN 60529
Mounting area (e.g.
control cabinet)
IP54 IP54 IP51
Housing IP20 IP20 IP20
Terminals IP20 IP20 –
Mechanical data 312210 314210 315210
Material
Bottom PC PC PC
Front PC PC PC
Coding PA PA PA
Mounting type plug­in plug­in plug­in
Dimensions
Height 76,0 mm 76,0 mm 76,0 mm
Width 12,6 mm 12,6 mm 12,6 mm
Depth 60,2 mm 60,2 mm 60,2 mm
Weight 45 g 46 g 46 g
Mechanical coding
Type E E E
Colour Yellow Yellow Yellow
The standards current on 2009­10 apply.
8.1 Safety characteristic data
Operating
mode EN ISO
13849­1:
2008
PL
EN ISO
13849­1:
2008
Category
EN IEC
62061
SIL CL
EN IEC
62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
13849­1:
2008
T
M
[year]
1­channel PL d Cat. 2 SIL CL 2 9,00E­09 SIL 2 7,89E­04 20
2­channel PL e Cat. 4 SIL CL 3 1,13E­09 SIL 3 1,66E­05 20
If the module is operated at an ambient temperature above 60° C, the values stated in the
table for PFH
D
and PFD will need to be doubled when a safety function is calculated.
All the units used within a safety function must be considered when calculating the safety
characteristic data.
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.