3 safety, 1 intended use, 2 system requirements – Pilz PNOZ m ES ETH User Manual
Page 8: 3 safety regulations, 1 use of qualified personnel, Section 3, Safety, Intended use, System requirements, Safety regulations
Safety
Operating Manual PNOZ m ES ETH
1002700EN04
8
3
Safety
3.1
Intended use
The expansion module
PNOZ m ES ETH is used for communication of the configurable con
trol system PNOZmulti 2 via Ethernet.
The expansion module may only be connected to a base unit from the configurable control
system PNOZmulti 2 (please refer to the document "PNOZmulti System Expansion" for de
tails of the base units that can be connected).
The configurable control system PNOZmulti 2 is used for the safetyrelated interruption of
safety circuits and is designed for use in:
}
ESTOP equipment
}
Safety circuits in accordance with VDE 0113 Part 1 and EN 602041
The expansion module may not be used for safetyrelated functions.
Intended use includes making the electrical installation EMCcompliant. The product is de
signed for use in an industrial environment. It is not suitable for use in a domestic environ
ment, as this can lead to interference.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
}
Use of the product outside the technical details (see chapter entitled “Technical De
tails”)
3.2
System requirements
Please refer to the "Product Modifications" document in the "Version overview" section for
details of which versions of the base unit and PNOZmulti Configurator can be used for this
product.
3.3
Safety regulations
3.3.1
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is someone who, because of their training, experience and current pro
fessional activity, has the specialist knowledge required to test, assess and operate the
work equipment, devices, systems, plant and machinery in accordance with the general
standards and guidelines for safety technology.
It is the company’s responsibility only to employ personnel who:
}
Are familiar with the basic regulations concerning health and safety / accident preven
tion
}
Have read and understood the information provided in this description under "Safety"
}
And have a good knowledge of the generic and specialist standards applicable to the
specific application.