Pilz PNOZ mc2.1p EtherCAT 2 - Manual (Page 25)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-1
8.1 Technical Details
8 Technical Details
8 8000 Technical Details Technical Details 8- 8.1 Technical Details 8100 Technical Details 8- ][Technische Daten_multi_Basis
Technische Daten_Satz Normen
The standards current on 2011-09 apply.
Technical details
Electrical data
Module's supply voltage via base unit
5 V DC
Voltage tolerance -2 %/+2 %
Power consumption 2.5 W
Status display LED
Times
Supply interruption before de-energisation
20 ms
Fieldbus interface
Fieldbus interface
EtherCAT
Device type Slave
Protocol CANopen over EtherCAT
Transmission rates 100 MBit/s
Connection RJ45
Galvanic isolation yes
Test voltage 500 V AC
Environmental data
Ambient temperature
0 - 60 °C
Storage temperature -25 - 70 °C
Climatic suitability in accordance with EN 60068-2-30 93 % r. h. at 40 °C
Condensation not permitted
EMC EN 61131-2
Vibration to EN 60068-2-6
Frequency
10 - 150 Hz
Max. acceleration 1g
Airgap creepage in accordance with EN 61131-2
Overvoltage category
III
Pollution degree 2
Rated insulation voltage 25 V
Shock stress
EN 60068-2-27
15g
11 ms
Mechanical data
Protection type
Mounting (e.g. cabinet)
IP54
Housing IP20
Terminals IP20
DIN rail
Top hat rail
35 x 7.5 EN 50022
Recess width 27 mm
Housing material
Housing
PPO UL 94 V0
Front ABS UL 94 V0
Dimensions
Height
94.0 mm
Width 22.5 mm
Depth 114.0 mm
Weight 140 g