Pilz PNOZ mc2.1p EtherCAT 2 - Manual (Page 24)

7.2 Display elements
7 Operation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-2
7.2 Display elements 7200 Display elements 7- Anzeige Legende aus-blink-blitz-1-2-flacker
Key:
7.2.1 Display elements for device diagnostics
Display elements for device diagnostics 7- Betrieb_Anzeige_EtherCAT_BA
LED off
LED flashes once
LED flashes twice
LED flashes once
LED flashes
LED on
LED LED status Meaning
Link ACT 1 Green Bus connection available at X1
Green Data traffic present at X1
Bus connection is not available at X1
Link ACT 2 Green Bus connection available at X2
Green Data traffic present at X2
Bus connection not available at X2
RUN Green The device is in "OPERATIONAL" status
Green The device is in "SAFE-OPERATIONAL" status
Green The device is in "PRE-OPERATIONAL" status
The device is in "INIT" status
ERR Red Application Watchdog Timeout
Red Sync Manager Watchdog Timeout.
Red The Slave device application has changed the EtherCAT status independent-
ly: The "Change" parameter in the AL status register is set to 01 (change/er-
ror).
Red Configuration error
EtherCAT communication is in operation
1
2
1
2
1