Pilz PNOZ mc2.1p EtherCAT 2 - Manual (Page 23)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-1
7.1 Messages
7 Operation
7 7000 Operation Operation 7- 7.1 Messages 7100 Messages 7- Betrieb_Meldungen_allgemein_BA
When the supply voltage is switched on, the PNOZmulti safety system
copies the configuration from the chip card.
The LEDs "POWER","DIAG", "FAULT", "IFAULT" and "OFAULT" light up
on the base unit.
Betrieb_Meldungen_Feldbus_EtherCAT
The expansion module PNOZ mc2.1p is configured and started auto-
matically. The LEDs "Link/Activity", "RUN " and "ERR" indicate the sta-
tus of the PNOZ mc2.1p at EtherCAT.