Pilz PNOZ mc6p CANopen coated version - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- Bestimmung/Gertebeschreibung_multi_Feldbus_CANopen
The fieldbus module PNOZ mc6p/mc6.1p is an expansion module of
the configurable control system PNOZmulti. It is used for communica-
tion between the configurable control system PNOZmulti and CANopen.
CANopen is designed for fast data exchange at field level. The expan-
sion module PNOZ mc6p/mc6.1p is a passive CANopen subscriber
(Slave). The basic communication functions with CANopen conform to
the guidelines of the CANopen User Group (CiA, for supported protocols
see Technical Details). The central controller (master) reads input infor-
mation from the slaves and writes output information to the slaves as
part of each cycle. As well as the cyclical transfer of usable data, the ex-
pansion module PNOZ mc6p/mc6.1p can also be used for diagnostic
and commissioning functions. Data traffic is monitored on the Master/
Slave side.
Bestimmung/Gertebeschreibung_multi_Zusatz_Modul
The expansion module may only be connected to a base unit from the
configurable control system PNOZmulti (please refer to the document
"PNOZmulti System Expansion" for details of the base units that can be
connected)
Bestimmung/Gertebeschreibung_multi_System
The configurable control system PNOZmulti is used for the safety-relat-
ed interruption of safety circuits and is designed for use in:
 E-STOP equipment
 Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_multi_ nicht sicherheitsgerichtete Funkt
The expansion module may not be used for safety-related functions.
Bestimmung/Gerätebeschreibung_EMV+Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the product
 Use of the product outside the areas described in this manual
 Use of the product outside the technical details (see chapter entitled
“Technical Details”)
Bestimmung/Gerätebeschreibung_Zusatz_Coated Version
The coated version of the product PNOZ mc6p/mc6.1p is suitable for
use where there are increased environmental requirements (see Techni-
cal Details).