UVP 81-0345-01 ChemiDoc-ItTS2 Imager - Manual (Page 7)

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 7
Thermal Printer
Epi UV Module
LED White Light Plate
BioLite MultiSpectral Light Source
Optional Equipment
UVP offers a variety of optional equipment to support the needs of varying laboratory environments. Refer to
Replacement Parts and Accessories at the end of this manual for optional equipment part numbers.
BioLite MultiSpectral Light Source
The BioLite™ MultiSpectral Light Source utilizes high
intensity xenon or halogen lighting in conjunction with fiber
optic guides to a supply powerful, directed illumination to a
variety of fluorescent stained samples. A wide range of
excitation and emission filters enable a wide spectral range
of wavelengths, including red, green, blue and NIR.
Thermal Printer
The thermal printer provides archive quality, 256 grayscale
prints and five optional cost-effective print sizes.
UV Modules for Epi (Overhead) Lighting
A set of two 4-watt ultraviolet modules can be connected
inside the darkroom to provide epi UV illumination. These
modules can be switched on or off in the Lighting menu
within the TS2 Software and can also be removed from the
darkroom and used as standalone handheld lamps (as seen
in the image to the right).
LED White Light Plate
The LED White Light Plate emits high uniformity with less
than 5% coefficient of variance (CV). Plug the LED White
Light Plate directly into the power supply within the darkroom
and select “White Light Plate” under the Lighting menu
within the TS2 Software.