UVP 81-0345-01 ChemiDoc-ItTS2 Imager - Manual (Page 26)

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 26
4. To select the quick-access templates to be shown at the top of the TS2 screen, press the
Templates button until the list of saved templates is shown. Then, drag the template to the desired
quick-access position.
To run a template, either:
1. Select the desired template from the Templates menu by pressing the gray check box icon to the
right of the template name, or
2. Select the template from the quick-access area.
Once the template is selected, all template settings and actions will automatically be performed on the
system.
A template is active when the template button shows white letters on a purple background. A template is
inactive when black letters are shown on a gray background.
To edit a template name, press the gray pencil icon to the right of the template name in the list of saved
templates. The template settings will be shown. Press the pencil icon in the upper-left corner of the screen to
the left of the template name. An on-screen keyboard will appear. Use the keyboard to enter the desired
template name. Press the Checkmark button to accept the revised name, or press the “X” button to cancel.
To delete a template, press the gray trash can icon to the right of the template name.
To disregard a template and enter settings and actions manually, press the
Manual Input button located at the top right of the software:
Connecting to a Network
The TS2 Imagers have built-in network capability, both wired and wireless. While it is fairly simple to connect
the system to a network, it is highly recommend to obtain assistance from a network administrator to ensure
that the process is completed properly.
Follow Microsoft or local standard network protocols for network configuration. To minimize the TS2
Software interface and access Microsoft Windows for network configuration, press the Minimize (“_”) button
in the upper-right corner of the software.
Installing Drivers or Additional Software
In the event that additional drivers or software must be installed on the system, exit the TS2 Software
interface and access Microsoft Windows by pressing the Close (“X”) button located in the upper-right corner
of the main TS2 screen.
To install drivers or additional software, copy the software to an external storage device, open Windows
Explorer, navigate to the appropriate folder and run the desired program.