UVP 81-0345-01 ChemiDoc-ItTS2 Imager - Manual (Page 21)

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 21
Saturation Warning
Turn on Saturation Warning to provide a bright yellow or
red image overlay on oversaturated areas of the image
during Live Preview. Yellow indicates mild overexposure
while red indicates extreme overexposure.
To capture an ideally exposed image, decrease the
aperture or exposure time until the yellow or red overlay
disappears.
To activate saturation warning, press the Saturation
Warning slider until the check mark appears.
Action
Press the Template Action button to select which action
the TS2 Imager will take when a template is selected.
Available actions include:
• Start Capture: When a template includes this Action,
all system settings will be adjusted according to the
template and then the image will automatically be
captured.
• Start Preview: When a template includes this Action,
all system settings will be adjusted according to the
template and an image preview will automatically be
shown.
• Do Nothing: When a template includes this Action, all
system settings will be adjusted according to the
template; no image preview or capture will occur.
Done and Save
After all template settings have been made, press the
Done (checkmark) button. Then, to save the selected
settings as a template for future use, press the Save (disk)
icon.
A window will appear prompting the user to enter a
template name using the on-screen keyboard. After the
name has been entered, press the Checkmark button to
accept the name or the “X” button to cancel.
“Gallery” Tab
To access the photo gallery, press to select the Gallery
tab.
Once active, select the desired image from the top of the
Gallery screen.
Open Image
To open a previously-saved image, press the Open Image
button. Pressing this button will open the Windows
file/folder navigation screen. Select the desired file and
press Open.