Spectrum Controls 1756sc-IF8u - Manual (Page 44)

32
ControlLogix ™ Universal Analog Input Module
3.
Drag and drop the controller configuration tags from the sample
project into your project.
1. Right click on the Controller Tags item of the sample project and select
edit.
2. Right click on the Controller Tags item of your project and select edit.
3. Scroll down to the Controller tags of the sample project and select all
the tags by highlighting them.
4. Drag and drop these tags into your project.
Note: IF8u_Config and IF8u_Input contain the configuration, data and
status tags for the IF8u module. The other tags are used for performing
various functions to your module via ladder logic.
Note: Be sure all tags are displayed before moving them. Select Display
All from the Edit drop down window.
Note: The “Local:3:I” and “Local:3:C” tags are not copied.