Pitney Bowes DI600 Inserting System - Manual (Page 96)

6 • Troubleshooting
6-8 SV40221 Rev. C
Clearing Material Stalls
Your machine has been designed to assure maximum performance.
In the event of a material stall, the display will indicate where the stall
has occurred and will suggest remedial action.
Follow the advice given by the error screen regarding clearing the
material. You may also press Clear Deck to attempt to feed the
material through the machine. If not successful, the sections below
tell you how to gain access to the material.
The Manual Advance
Knob
Having located the material,
you may need to use the
Manual Advance Knob to
manually feed material out of
the grip of rollers, etc.
The Manual Advance Knob
is located behind the lower
door at the center front of the
machine.