Pitney Bowes DI600 Inserting System - Manual (Page 102)

6 • Troubleshooting
6-14 SV40221 Rev. C
Access to the Envelope Exit Area
Pull down the envelope exit
area door, as shown, to gain
access to stalled material.
When closing the door, make
sure it is firmly latched into
position.
NOTE: If a power stacker is
fitted, it may need to be moved
to gain access. Refer to the
stacker’s Operator Guide.
Access to the Envelope Inserting/Sealing Area
Access can be gained to the
insertion and sealing areas
by lifting the plastic cover and
lowering the envelope exit area
door.
Points arrowed in the
illustration can be unlatched
to allow access to stalled
material.