beautypg.com

Important safety notes, 1 • introduction – Pitney Bowes DI600 Inserting System User Manual

Page 10

background image

1 • Introduction

1-2

SV40221 Rev. C

Important Safety Notes

Follow these basic safety precautions when operating this machine:
• Use only Pitney Bowes approved supplies, in particular aerosol

dusters. Improper storage and use of aerosol dusters or

flammable aerosol dusters, can cause an explosive-like condition

that could result in a personal injury and/or property damage.

Never use aerosol dusters labeled flammable and always read

instructions and safety precautions on the duster container.

• To obtain Pitney Bowes supplies, please contact our Supply

Line or on the web at PB.com (see the Pitney Bowes Contact

Information List at beginning of this guide). Material Safety Data

Sheets can also be acquired from the Supply Line or PB.com.

• Read all instructions before operating the equipment. Only use

the equipment for its intended purpose.

• Operation of this equipment without periodic maintenance will

inhibit optimum operating performance and could cause the

equipment to malfunction. Contact your Pitney Bowes Customer

Service Representative for required service schedule.

• Use the power cord supplied with the machine. Plug it and all

other supplied power cords into a properly grounded wall outlet

that is located near the machine and easily accessible, meaning

it is free from obstruction and there is enough room around the

unit for servicing.

• The power cord wall plug is the primary means of disconnecting

the machine from the AC supply.

• Do not use an adapter plug on the line cord or wall outlet. Do not

remove the ground pin from the line cord.

• Avoid using wall outlets controlled by wall switches or shared

with other equipment. Do not route the AC power cord over

sharp edges, or allow it to be trapped between furniture and/or

furniture and the wall.

• Avoid touching moving parts or materials while the machine is

in use. Keep hands, loose clothing, jewelry, and long hair away

from all moving parts.

• Do not remove covers. Covers enclose hazardous parts that

should only be accessed by properly trained service personnel.

This manual is related to the following products: