Parr Instrument 6200 - Manual (Page 46)

A
Menu Operating Instructions
P a r r I n s t r u m e n t C o m p a n y 44
Automatic Sample ID Controls
Automatic Sample ID: When set to ON it will
automatically assign sample identification
numbers in accordance with instructions set in
the other two keys on this menu.
Auto Sample ID Prefix: An entry here will be
used as a prefix for all sample IDs.
Next Auto Sample ID Number: Establishes the
initial sample number for a series of tests and
then shows the next sample ID which will be
assigned.
Auto Sample ID Increment: Establishes the
increment between sample numbers.
Sample Weight – Warning Above: This key displays
and leads to a sub-menu used to set the maximum
allowable sample weight (including spike) in grams.
A warning will be given if sample weights above
this value are entered.
Spike Weight Entry Mode: This key steps through
the options for entering spike weights either manu-
ally through the touch screen, automatically through
the balance (USB) port or through a network.
Sulfur Entry Mode: This key toggles steps through
the options for entering sulfur correction value
either manually through the touch screen or through
the balance (USB) port.
Moisture Entry Mode: This key steps through the
options for entering the moisture percentage wheth-
er manually through the touch screen or automati-
cally through the balance (USB) port.
Auto Preweigh ID Controls: Accesses sub-menu,
used to automatically assign sample identification
numbers when a series of samples are pre weighed
ahead of the time they are actually tested.
Preweigh Sample ID Controls
Automatic Preweigh ID: ON/OFF toggle for this
feature.
Automatic Preweigh ID Prefix: An entry here
will be used as a prefix for all pre-weigh sample
identification numbers.
Next Automatic Preweigh ID Number: Shows
the next sample identification number which will
be assigned and is used to enter the beginning
Sample ID of any series.
Automatic Preweigh ID Increment: Establishes
the increment between samples.