beautypg.com

Chapter 8, File management, Clearing memory – Parr Instrument 6200 User Manual

Page 33: Removable sd memory, Chapter 8 31, Hapter

background image

File Management

6200

8

w w w . p a r r i n s t . c o m

31

c

haPter

8

File Management

The 6200 Calorimeter will hold data for 1000 tests
in its memory. These tests may be pre weights,
preliminary or final reports for either standardiza-
tion or determination runs. Once the memory of the
controller is filled, the controller will not start a new
analysis until the user clears some of the memory.

Clearing Memory

The FILE MANAGEMENT key on the main menu leads
to the file management sub-menu. The RUN DATA
FILE MANAGER
key leads to a listing of the files.

• Single files can be deleted by highlighting the

file and pressing the DELETE key. The controller
will then ask the user to confirm that this file is
to be deleted.

• A series of files can be deleted by selecting the

first file in the series and then the last file in
the series using the EXTEND SEL key and then
pressing the DELETE key.

• Once a file is deleted there is no way to recover

the data.

Removable SD Memory

The controller of the 6200 Calorimeter can accept
SD memory cards. These cards can be used to:
• Copy test file data for transfer to a computer.
• Copy user settings for back up.
• Reload user settings to the controller.
• Restore or update the controller’s operating

system.

SD memory cards are inserted into slots on the back
of the control section of the calorimeter. Keys are
provided on the FILE MANAGEMENT sub-menu to
initiate each of the above actions with the exception
of restoring or updating the controller’s operating
system.

Note: The calorimeter cannot read SDHC

cards. This limits the capacity of the SD

card to 2 GB or less.