Luxul XBR-2300 - Manual (Page 9)

9
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
4.4 Hardware Installation
4.4.1 Installing the XBR-2300 in a Rack
The XBR-2300 can easily be installed in a standard 19” rack. The XBR-2300 includes two
mounting ears for installing and stabilizing the switch. For attaching the mounting ears and
installing the router within a rack, please refer to the following illustration:
4.4.2 Rack-Mounting the XBR-2300
„
Using the included screws, attach the mounting ears to each side of the router.
„
Mount the router in the rack with the LEDs facing outwards. Be sure the router is level
and properly secured within the rack.
4.5 Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the bottom
of the XBR-2300.
Attaching the Rubber Feet to the XBR-2300
4.5.1 Connecting to the Power Source
Before installing the XBR-2300, test the Internet connection to validate that it is
functioning properly. When Internet access has been confirmed, follow the steps below
for Router installation.
1. Establish LAN Connection: Connect one of the XBR-2300 LAN port to a switch,
access point, or computer