Luxul XBR-2300 - Manual (Page 11)

11
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Login to the router with the following steps:
1. Plug an Ethernet cable into any of the three LAN ports of the router
2. Plug the other end into the Ethernet port of your computer
3. Power on the router
4. Check to see that the IP address of the computer is within this network segment:
192.168.0.xxx (“xxx” ranges 2~254). For example, 192.168.0.100.
5. Open the Web browser, and enter 192.168.0.1. The router login window appears,
as shown below.
6. Enter the user name and password (default user name and default password
are both set as “admin”), and then click “OK” to login to the router
configuration window.
5.2 Status
5.2.1 WAN1
WAN1 displays the current WAN1 Connection Status, Connection Mode, WAN IP,
Subnet Mask, Gateway, DNS Server, Alternate DNS Server, WAN MAC Address, and
WAN Port Traffic.
„
Connection Status: Displays the WAN connection status
w
Disconnected: The WAN port has no connection to the Internet
w
Connecting: The WAN port is obtaining an IP address (Dynamic settings only)
w
Connected: The XBR-2300 is connected to the Internet
w
Network cable is not connected: No Cable Connected
„
Connection Mode: Displays currently configured connection mode