Luxul XBR-2300 - Manual (Page 46)

46
XBR-2300
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-2300 Vers: 07314
NOTE: The configuration on the Client and Server must match to make
a secure connection. If authentication errors occur, test with
this setting disabled. However, it is not recommended to run the
connection continuously with encryption disabled as the traffic
will not be encrypted.
„
PPTP Net Segment: The Network to be accessed after completing the PPTP
tunnel (i.e. 192.168.1.0)
„
PPTP Mask: The Network subnet mask (i.e. 255.255.255.0)
„
Status: Displays the current PPTP connection status
„
Obtained PPTP Address: Displays the IP Address of the PPTP tunnel connection
5.7.3 Connected Clients
This page shows the information of PPTP Clients that are connected.
„
User name: User name of PPTP Client
„
Internet IP: PPTP Client remote IP address
„
Assign IP: Internal IP address assigned by the PPTP Server
5.8 Monitor
There are three submenus in the Monitor section:
5.8.1 Statistics
Displays traffic statistics of the XBR-2300 by connected device.
„
Enable Traffic Statistics: Enables or Disables traffic statistics (Disabled by default).
NOTE: It is recommended to use Traffic Statistics only when necessary
and then disable to ensure best possible network performance.
„
Refresh: Refreshes the Statistics list