Luxul XBR-2300 - Manual (Page 43)

43
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5.6.6 Static Routes
Static Routes can be configured on this page.
„
Destination IP: Designated the IP Address of a destination device or
destination Network.
NOTE: The IP address for a device would be similar to 192.96.82.123, whereas
a network would be represented by 192.96.82.0.
w
Subnet Mask: The subnet mask of the destination IP Address or Network
w
Gateway: The IP address of the XBR-2300’s entry for next hop. If the traffic should
be routed to the Internet, this would be the WAN Interface address. If the traffic
should be routed to the internal network, this would be the LAN IP Address.
5.7 VPN
5.7.1 PPTP Server
There are three sections in the PPTP Server submenu: PPTP Server, Client Setting and
Connected Clients.
5.7.1.1 PPTP Server
The PPTP server supports the connection between the PPTP Client and the
VPN Router.
Example: You are traveling and/or working from a remote location and need access
to a server at the office or on your home network. The XBR-2300’s VPN Server can be
configured to allow access to the internal network while providing a secure
encrypted connection.