Xbr-2300, Ip address: specifies the ip address to be bound – Luxul XBR-2300 User Manual
Page 38
38
XBR-2300
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-2300 Vers: 07314
5.5.5.1 IP-MAC Binding
This function Binds a specified MAC address to a specified IP Address. This is useful in
networks where a device IP and the MAC address must remain linked (i.e. VoIP Phones,
Servers, Secondary Routers, etc.)
Enable IP-MAC Binding: Enables IP-MAC Binding function
Mode: There are two optional modes: Normal Mode or Mandatory Mode
w
Normal Mode: Blocks any IP Address that does not match the bound
MAC Address. IP Addresses not included in the binding list will
communicate normally
w
Mandatory Mode: Only IP Addresses matching the MAC addresses on the Binding
List are allowed to access the Internet. All addresses not included
in the list are blocked.
ARP List: Displays the corresponding IP and MAC addresses in the ARP Table. Select
Connected Clients in ARP List to manually add IP and MAC addresses.
IP Address: Specifies the IP address to be Bound.
MAC Address: MAC addresses to be Bound
NOTE: Once binding is enabled, the device can only access the internet
when the IP and MAC addresses on the binding list match
Remark: Name of Binding rule