Luxul XBR-2300 - Manual (Page 32)

32
XBR-2300
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-2300 Vers: 07314
„
Enable: Enables or Disables Bandwidth control for the specified device(s)
„
IP Address: Sets the IP Address(es) for bandwidth controlled devices
„
Uplink Range: Maximum upload data rate per device in Kilobytes per second
„
Downlink Range: Maximum download data rate per device
„
Uplink /Downlink Mode: Selects whether the specified limits are to be shared by
devices in the range or if each individual device is allocated this limit
„
Uplink/Downlink Policy: Selects whether or not surplus bandwidth can be used
NOTE: if you choose “when the bandwidth has a surplus, you can use more
bandwidth”, the XBR-2300 will automatically manage the upload and
download flow.
„
Description: Name of Bandwidth Control Rule
5.4.5.2 NAT Settings
NAT Settings allow for the specification of the maximum number of NAT Table entries
created by a device or group of devices on the network. This basically limits the number
of websites a device can visit at any given time.