User guide – Luxul XBR-2300 User Manual

Page 23

User Guide

Other trademarks and registered trademarks are the property of their respective owners

NOTE: Must “Save” each time a change is made

CAUTION: Firewall protection for all devices set as a DMZ Host will be

disabled!!!

CAUTION: When enabled DMZ takes precedence over Port Forwarding

and VPN disabling these functions of the router

5.3.8 Access Control
Access Control determines which devices on your WAN and LAN will be allowed to
open the Web based management portal for the XBR-2300.

5.3.8.1 LAN Access Control

Enable: Enables access to the Web Interface

IP Address: Enter the IP address of the device allowed to access the Web interface.

NOTE: If you use the default of 0.0.0.0 all devices can connect.

Port: The TCP port number to access the Web interface. The default port number for
LAN traffic is 80 (http)

NOTE: When an IP address is set, no other device can log on to the Web

Interface. Example:: when the XBR-2300 default IP address is
192.168.0.1, if you only permit a client computer with the IP address of
192.168.0.100 to access the Web portal via port 8888, only that device
will be allowed to connect. To access the Web Interface, using the
following address format

http://192.168.0.1:8888